 |
 |
 |
 |
 |
 |
 A range of different identification tags is shown below. These are just examples of the diverse applications for our product. Each client is different and every application can be tailored to your business. There are millions of potential uses and different tag designs. Why not talk to us about your requirements? |
 |
The Toughened Badge Secure The COBALT Electronic Radio Frequency Badge Secure has been developed in response to a requirement to attach the RFID chip to flat areas with little chance of accidental removal. The Identifier is made from a special high impact resin with the chip being fitted inside and is attached with security screws or rivets. Actual Size - 30mm x 21mm x 4mm The Toughened Nail The COBALT Electronic Radio Frequency Identification Nail has been developed in response to a requirement to permanently fix the RFID chip into softwoods such as wooden electric poles, BT poles and pallets. The nail is made from a special high impact resin with the chip being fitted inside and is inserted with a hammer for ease of use. The nail can be inserted into hard wood or trees but requires a small hole drilling to ease insertion Actual Size - 34mm x 4mm |
| The Toughened Badge Small The COBALT Electronic Radio Frequency Badge Small has been developed in response to a requirement to attach the RFID chip to instruments and small items with flat surfaces. The Badge Large is made from a special high impact resin with the chip being fitted inside and is attached with a 3m epoxy tape on the base. Actual Size - 20mm x 6mm x 3mm The Toughened Identifier The COBALT Electronic Radio Frequency Identifier has been developed in response to a requirement to attach the RFID chip to lifting gear. The Identifier is made from a special high impact resin with the chip being fitted inside and is attached with a heavy-duty cable tie. Actual Size - L22mm x W18mm x H15mm |
 |
 |
The Toughened Badge Large The COBALT Electronic Radio Frequency Badge Large has been developed in response to a requirement to attach the RFID chip to flat surfaces. The Badge Large is made from a special high impact resin with the chip being fitted inside and is attached with a 3m epoxy tape on the base. Actual Size - 35mm x 22mm x 3mm |
The Toughened Stillage Plug The COBALT Electronic Radio Frequency Stillage Plug has been developed in response to a requirement to fit the RFID chip into metal stillages. The Stillage Plug is made from a special high impact resin with the chip being fitted inside and is inserted into the stillage frame with a G clamp or similar and is held firmly in place with side lugs. Actual Size - 21mm x 5mm |
 |
 |
Rod A rod shaped carrier used for inserting into Lifting Slings Harnesses etc and also used to insert into trees. Actual Size - 35mm x 5mm |
Blue Glue Blue Glue is a special high adhesive epoxy that also protects the transponder against impact. It is completely non toxic and is available with an application gun and cyclonic nozzles to ensure perfect mixing and ease of fitting. |
 |
 |
Use this Combined Scanner and Database Entry System to Record Notes as you go along. This product is unique to Hitec ID |
|
Home : Company : Products : Information : What's New : Contact
